PicoScope 6000E 系列示波器

PicoScope 6000E 系列示波器

8-bit to 12-bit FlexRes® ADCA choice of 4 (up to 1 GHz) or 8 (up to 500 MHz) analog channelsSupports up to 16 digital MSO channels200 ms capture time at 5 GS/sUp to 4 GS capture memory50 MHz 200 MS/s 14-bit AWG300 000 waveforms per second update rate
PicoScopePicoLog® and PicoSDK® software included21 serial protocol decoder / analyzers includedMask limit testing and user-definable alarmsHigh-resolution time-stamping of waveformsOver ten million DeepMeasure™ results per acquisition Advanced triggers: edge, window, pulse width, window pulse width, level dropout, window dropout, interval, runt and logic

PicoScope 6000E 系列示波器


Optional accessories

A3000 Series active probes with Intelligent Probe Interface
The Pico A3000 Series are high-impedance active oscilloscope probes. They have been designed to have minimal impact on the signal being probed with maximum signal transfer to the PicoScope 6000E Series via the intelligent probe interface. Their ergonomic design allows for comfortable handheld use with the addition of a button to start and pause capturing in PicoScope 6.
Features
Up to 1.3 GHz probe bandwidth
Click-to-fit convenience
Super light flexible cable
Control capture start and stop using a button on the probe
Connects directly to PicoScope 6000E Series oscilloscopes with the Intelligent Probe Interface
Powered by the oscilloscope, eliminating separate power supplies and interface boxes
Automatic probe detection and unit scaling
LED status indicator


 
TA369 MSO pod
The PicoScope 6000E Series can be upgraded to MSO capability. This consists of a detachable active MSO pod, powered by the scope, with eight permanently attached flying leads terminating in MSO probes for connection to the circuit under test.
Features:
8 digital inputs per pod
500 MHz bandwidth, 1 Gb/s
5 GS/s sampling on 16 digital channels
1 ns minimum pulse width
Minimal load on the device under test: 101 kΩ ∥ 3.5 pF
Innovative ground clips for easy connection to 2-row, 2.54 mm-pitch headers
8 ground leads and 12 mini test hooks included

Probe positioning system
The Pico oscilloscope probe positioning system holds your circuit board firmly during soldering, inspection and test.The kits include flexible probe holders which secure magnetically to the steel base plate. When the probes are installed in the holders they can be positioned to make contact with points of interest on the circuit board and will remain in contact while you make measurements in the PicoScope software.The large steel base plate is mirror-finished allowing you to see any items such as status LEDs underneath the PCB.Probe positioning system kit contents:ItemPQ215 kitPQ219 kitPQ218 kit


Passive analog high-impedance probes
P2056 500 MHz and P2036 300 MHz passive probes are supplied with your scope and are also available separately in single or dual packs. These probes feature a probe-detect readout BNC connector allowing automatic recognition as a 10:1 attenuator by the scope.Probe connection is confirmed by a notification in PicoScope 6.
Features:
Up to 500 MHz bandwidth
10:1 attenuation
High-frequency response trimmed to match the oscilloscope
Probe-detect readout pin for automatic range scaling

蘇州洋嘉電子有限公司成立于2012年，注冊資本1200萬人民幣，我公司主要為各類客戶提供工業測試測量方案及相關儀器。本公司擁有專業的技術服務團隊以及相關的產品服務渠道，通過雙方合作，本公司將為您提供高品質及全面的專業服務！
公司經營范圍涵蓋工業測試測量，電子產品，機電設備，儀器儀表，計算機軟硬件等。產品廣泛應用于電子制造業，機器制造業，醫療化工業，計量校驗等行業。
本公司是一家全面經銷型優質代理商，目前與國內外及中國臺灣地區多家儀器及設備生產商建立了全面伙伴關系，共同開拓及維護者國內外優質客戶渠道。受歐美及東北亞制造商服務和價值理念，我公司目前也在全面建立健全并提升服務宗旨，系統化為客戶提供解決方案，為客戶排除和解決生產困擾，使客戶終取得高效率的創造價值。